Aceup Energy 4350 Watt Gas Generator for home use, Portable Gas Powered generator 30A Outlet, EPA & CARB Compliant

Price range: $733.50 through $794.99

About this item

  • 3600 Running watts and 4350 Peak watts, 4 gallon fuel tank with fuel gauge, up to 10 hours of run time at half load
  • Powered by 7HP 212cc 4-stroke OHV engine with a recoil start, 60HZ
  • Gasoline generator includes one 120V L5-30R 30A locking receptacle, two 20A standard outlet, a voltage meter, a bottle of engine oil
  • All Aceup Energy electric generators are functionally tested in the factory to guarantee quality; EPA and CARB compliant; Backed by a 2 year limited warranty with free lifetime technical guidance from experts
Select options This product has multiple variants. The options may be chosen on the product page

Aceup Energy 9HP 274cc Gas Engine Horizontal Shaft, 4 Stroke OHV Gas Motor, Shaft 1″ (25mm) Diameter Recoil Start

Price range: $357.75 through $483.77

About this item

  • Shaft 1" diameter, 3.48" long, end tapped with 7/16"- 20 UNF, Keyway 1/4"
  • Small gas engine motor built-in 4 stroke, air cooled with recoil start
  • 9HP 3800RPM, OHV gasoline engine, 1.32 gallon fuel tank
  • Equipped with steel camshaft, forged crankshafts and cast iron cylinder liners to ensure superior performance and longer service life
  • All our engines tested in the factory to guarantee quality; EPA compliant; Backed by a 1 year limited warranty with free lifetime technical guidance from experts
Select options This product has multiple variants. The options may be chosen on the product page

Aceup Energy Magnetic Oil Dipstick for Inverter Generators, with O-Ring Rubber Seal, Compatible with Yamaha, WEN, Predator and more – Silver

Price range: $15.50 through $25.49
  • Magnetic oil dispstick: The universal design is M18*2.5, with a size of 76mm*26mm, which is suitable for most 1000w-4500watts generators on the market
  • Durable and easy to clean: Made of high-quality aluminum alloy, which is not easy to rust and convenient to clean. The O-ring rubber seal prevents oil from being spilled during operation and transportation
  • Help extend engine service life: Protect your generators. The magnetic tip can catch the metal chips in the fuel tank inside the generator helping to reduce the loss of the generator and extend the service life of the generator. And it can be reused as long as the metal shavings on the magnetic oil dipstick are cleaned
  • Compatibility: Compatible with these generators, Aceup Energy AI2300, AI4500, AWP50, AE170B, AG4350, and compatible with WEN 56125i, WEN 56200i, WEN 56202i, WEN 56203i, WEN 56235i, WEN 56310i, WEN 56310i-RV, WEN 56380i, WEN GN400i, WEN DF400i, Yamaha EF2000iS, Yamaha EF1000iS, Powerhorse 42411 and more
  • CAUTION: The magnetic dipstick needs to be removed after the engine has cooled down to avoid burns or other accidents, do not remove the magnetic dipstick while the engine is running
Select options This product has multiple variants. The options may be chosen on the product page

Aceup Energy Pull Start Assembly Recoil Starter Compatible with Powersmart Pulsar 2HP Gas Generator 63CC 64CC 69CC 71CC 66619 60338 69381

$53.21
  • Applicability: This pull start assembly recoil starter as a neccessary replacement part for 2 stroke handheld gasoline generator, compatible with Powersmart PS50(1200W,71cc), Aceup Enegy AG1000/AG1200(1000W/1200W, 71cc), Pulsar PG1202SA(1200W, 69cc), other 63cc/64cc 2HP 800W 900W handheld gasoline generator etc
  • Compatible with: Fits for 66619, 60338, 69381, 63025, 63024. Please carefully check the size and your original pawl before ordering to ensure it is successful fitting your machine
  • Premium Quality Material: Made of sturdy metal casing which has a long service life, and a retractable pull cord that is flexible to pull. The suitable size handle to give you comfortable grip
  • Easy Installation: Package includes ONLY 1 x recoil starter. It is 90% pre-installed before leaving the factory, so all you need to do is remove the old recoil starter and replace it with this new one, screw it on to complete installation (Not including bolts)
  • Ensure Smooth Running: The flexible retractable pull cord of this recoil pull starter helps to start the engine quickly and ensure smooth running

Aceup Energy RV Adapter, 30 Amp NEMA TT-30P Male Plug to L5-30R Female Outlet Output 125V, Generator Power Adapter

$41.85

About this item

  • The 30 amp NEMA TT-30P adapter converts a 30 amp 125V TT-30R generator socket into a 30 amp 125V L5-30R RV socket, allowing a portable generator to generate power for the RV
  • The conversion adapter is used to connect to a locked generator socket to make your generator and RV power cord compatible
  • The surface has a comfortable pattern of non-slip structure, so that the two sockets are tightly connected, easy to install
  • Suitable for Aceup Energy generators, 30 amp 120V lock socket generators and recreational vehicle
  • UL498 certification

Aceup Energy RV Adapter, 30Amp NEMA L5-30P 3-Prong Twist-Lock Power Male Plug to 30 Amp TT-30R Female Outlet Output 125V, Generator Power Adapter

$41.85

About this item

  • The 30 amp NEMA L5-30P adapter converts a 30 amp 125V L5-30R generator socket into a 30 amp 125V TT-30R RV socket, allowing a portable generator to generate power for the RV
  • The conversion adapter is used to connect to a locked generator socket to make your generator and RV power cord compatible
  • The surface has a comfortable pattern of non-slip structure, so that the two sockets are tightly connected, easy to install
  • Suitable for Aceup Energy generators, 30 amp 125V lock socket generators and recreational vehicle
  • UL498 certification

ACROPIX 10.9sqft Car Sound Deadening Mat Heatproof Wave Foam Deadener 80″ x 20″ Black – Pack of 1

Price range: $42.74 through $134.24

About this item

  • 1 Pcs Universal Cotton Blends Sound Deadener Insulation Mat, self adhesive and without tearing. Two layer design which is more durable.
  • Feature: Heat shield mat reduce more noise of vibrations and bumps, Improves comfortable when your are driving. It also with insulation function which reflect and blocks heat from the sun or engine. Non-flammable to reduce temperature disturbance.
  • Good Replacement: The material used is a good insulator! The sound deadener material allows you to deal with both, cold and heat. This is especially important in hot climate areas. The well insulated interior is a pledge of good comfort while in the vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and an enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
  • Easy Installation:Refer to the using position to cut the appropriate size and install. Placement of Using: Hood, Ceiling, Door, Cockpit Floor, Tailgate, Firewall and U Type Wall, Front fender, Front and Back Wheels.
  • Note: Please check if the mat size is enough for your installation position before buying. Dimension: 203x50cm / 80"x20"(L*W),Total Coverage Area: 10.9sqft.
Select options This product has multiple variants. The options may be chosen on the product page

ACROPIX 10m 33ft Universal Car Audio Speaker Sealing Tape Black – Pack of 1

$13.79
  • 1pc Foam Speaker Sealing Tape
  • Dimension: 10m x 1cm/33ft x 0.4"(L*W)
  • Function - It can be used for the airtight mounting of speakers, covers, base reflex tubes, handles, etc.
  • Quick Installation - Easy to install and replace the sealing tape, no special tools are needed.
  • Package Includes: 1pc Speaker Sealing Tape

ACROPIX 118mil 3mm 11sqft Universal Sound Deadener Mat 39.4″ x 39.4″ Closed Cell Foam Heat Shield Material for Car Boat Hood Engine Black – Pack of 1

$60.87

About this item

  • 1 Pc Sound Deadening Mat with sound insulation design. It made of closed cell foam. 3mm Foam feature high noise reduction, to reduce engine, road and transmission noise, which provice a comfortable environment while on driving.
  • Feature: Sound damping pad with heat shield design. Heatproof. Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel. Keeps your car stay cooler in the summer and warmer in the winter.
  • Good Replacement: For Car, Boat and Golf Cart, such as hood, door, wheel arch, engine compartment, engine bays and body panels. Sound heat deadener insulation also fit for firewall, U type pipe, kitchen sink and computer case
  • Easy Installation: The sound dampening material comes in handy size which make it easier to cutting and installation. Automotive self adhesive insulation, every insulation pad is high temperature resistance. It also moistureproof and good for sealing against water.
  • Note: Please check if the mat size is enough for your installation position before buying. Number of sheets: 1pc. Mat Size: 100cm*100cm / 39.4" x 39.4", Total Coverage Area: 11 sqft, Thickness: 118mil/3mm

ACROPIX 118mil 3mm 6sqft Universal Sound Deadener Mat 39.4″ x 23.6″ Closed Cell Foam Heat Shield Material for Car Boat Hood Engine Black – Pack of 1

$49.85

About this item

  • 1 Pc Sound Deadening Mat with sound insulation design. It made of closed cell foam. 3mm Foam feature high noise reduction, to reduce engine, road and transmission noise, which provice a comfortable environment while on driving.
  • Feature: Sound damping pad with heat shield design. Heatproof. Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel. Keeps your car stay cooler in the summer and warmer in the winter.
  • Good Replacement: For Car, Boat and Golf Cart, such as hood, door, wheel arch, engine compartment, engine bays and body panels. Sound heat deadener insulation also fit for firewall, U type pipe, kitchen sink and computer case
  • Easy Installation: The sound dampening material comes in handy size which make it easier to cutting and installation. Automotive self adhesive insulation, every insulation pad is high temperature resistance. It also moistureproof and good for sealing against water.
  • Note: Please check if the mat size is enough for your installation position before buying. Number of sheets: 1pc. Mat Size: 60cm*100cm / 39.4" x 23.6", Total Coverage Area: 6 sqft, Thickness: 118mil/3mm

ACROPIX 12mm ID. 19.7mm OD. Engine Oil Crush Washers Drain Plug Gaskets Silver Tone – Pack of 50

$20.24

About this item

  • 50(+/- 2%) pcs Universal Aluminum alloy Oil Crush Washers
  • Direct Fit to prolong the oil drain plug crush gasket washers life time. Size: O.D.(outside diameter): 19.7mm, I.D.(inside diameter): 12mm, Thickness: 2mm.
  • Function - Ensuring proper fit with the drain plug and creating a tight seal.
  • Quick Installation - Easy to install and replace the broken oil crush washers, no special tools needed.
  • Note: Please ensure this product is suitable for your vehicle before purchasing.

ACROPIX 15567562 / Rear/Fuel Tank Filler Neck for GMC C1500 Pickup 1988-1992 for Chevy K1500 Pickup 1988-1991 / Fuel Tank Filler Neck Hose/Durable / 1 Pcs/Black Car Parts

$52.19
  • Auto Parts: VEHICLE COMPATIBILITY: for GMC/ for Chevy C1500 Pickup 1988-1992, for GMC/for Chevy C2500 Pickup 1988-1991, for GMC/for Chevy C3500 Pickup 1988-1991, for GMC/for Chevy K1500 Pickup 1988-1991, for GMC/for Chevy K2500 Pickup 1988-1991, for GMC/for Chevy K3500 Pickup 1988-1991
  • Car Components: PRODUCT INFORMATION: The Black Fule filler tank neck is made with materials, durable and long-lasting, providing reliable performance in even the harshest road conditions
  • Automobile Parts: OE NO.: 15712147, 15640371, 15567562, 577-243
  • Car Accessories: DIRECT INSTALL: Easy and quick to install. Tools you may will need: Pry Bar, 7mm Socket, 8mm Socket, Ratchet, Socket Extensions
  • Auto Components: PACKAGE LIST: 1Pcs Fule Filler Tank Neck