Show sidebar
Show 9 12 18 24
Hot
41v36rrajgl. ac us800
41cgkc6svul. ac us800
Add to compare

uxcell 10pcs 1/8″(3mm) Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain Bottles Pots Brick

, , , ,
$16.79

About this item

  • SIZE - 3mm(1/8-inch) Drilling Diameter, 2.5mm(0.1-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
Add to wishlist
Add to cart
Quick view
Hot
51jxnsuxwzl. ac us800
3140q9uaepl. ac us800
Add to compare

uxcell 1mm Diamond Twist Drill Bits High-Speed Steel Tipped Drill for Glass Sea Shells Stone Tiles for Jewelry Beach Glass Shells Lapidary Ornament Bracelet Necklace Arts 30pcs

, , , ,
$35.54

About this item

  • [SIZE] - 1mm diameter, 11mm length twist drill bit with 0.7mm shank.
  • [MATERIAL] - Diamond-coated high-speed steel is made by spiral technology, has both toughness and hardness and is not easy to break. The drill bit is sharp and is easy for chip removal.
  • [APPLICABLE MACHINE] - Widely used in rotary tools such as hand drills, drill presses, flex shafts, bench drills, and hanging mills.
  • [APPLICATION] - Suitable for drilling small holes in glass, soft metal, sea shells, jade, pearls, porcelain, drywall, and so on. A tool used by jewelry designers to drill clean holes for making earrings, pendants, and bracelets.
  • [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, and extend the service life and drilling accuracy.
› See more product details
Add to wishlist
Add to cart
Quick view
Hot
21 b1phhenl. ac us800
31nni5avlml. ac us800
Add to compare

uxcell 7mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 200mm Length for Wood Plastic Aluminum

, , , ,
Price range: $17.09 through $47.39

About this item

  • Specification: Drill Bit Diameter: 7mm / 0.28-inch; Flute Length: 135mm / 5.31-inch; Shank Diameter: 7mm / 0.28-inch; Total Length: 200mm / 7.87-inch; 1 x Lengthened Drill Bits
  • High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
  • Extended Drill：The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
  • Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
  • Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
› See more product details
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Hot
31hhmljbazl. ac us800
31kpueaydl. ac us800
Add to compare

uxcell Chuck Key 8mm Pilot 11 Teeth for 3-16mm Drill Chuck Yellow

, , , ,
$16.49

About this item

  • [SIZE] - 8mm Pilot 11T 21.5mm gear diameter, fit for 3mm-16mm drill chuck
  • [PACKAGE CONTENT] - 1 x Drill Chuck Key (Be sure to check pilot diameter and gear diameter before purchase)
  • [CONSTRUCTION] - Made from solid carbon steel and coated with durable plastic
  • [COMMON USE] - Ideal for drill tightening and loosening, keep your drill bits firmly in place
  • [GENERAL PURPOSE] - Helps with securing drill bits in hammer drills and is also universal for many other types of drills
Add to wishlist
Add to cart
Quick view
Hot
31k2mevl ll. ac us800
31cximdlhgl. ac us800
Add to compare

uxcell Combination Drill and Tap Bit, 1/4″ Hex Shank M5 x 0.8 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 2pcs

, , , ,
Price range: $20.39 through $20.99

About this item

  • Combination Drill and Tap Bit: Thread Size: M5 x 0.8; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
  • Wide Applications: Suitable for processing holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
  • Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
  • Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
  • Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
› See more product details
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Hot
3143wu71rel. ac us800
21syuv73wul. ac us800
Add to compare

uxcell PCB Drill Bits 0.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 5 Pcs

, , , ,
Price range: $11.99 through $27.74

About this item

  • Specification: Cutting edge diameter (CED): 0.5mm; cutting edge length: 6.5mm; shank diameter: 3.175mm / 1/8inch (approx.); overall length: 38mm / 1-1/2inch (approx.)
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
› See more product details
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Hot
31f0zgjh0pl. ac us800
31q7xfosgsl. ac us800
Add to compare

uxcell Square Hole Drill Bit, 1/2″ High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking

, , , ,
Price range: $32.69 through $36.14

About this item

  • 【SIZE】1/2" (12.7mm) square chisel width, 75mm cutting depth, 205mm total length, 9.7mm shank diameter.
  • 【TIP AND EDGE】The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast.
  • 【MATERIAL】Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel, durable and lasts long.
  • 【ADVANTAGE】With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs.
  • 【OPERATION】Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood. This drill bit cannot be used with a hand drill. If you want to use the drill bit with a drill press, you will need accessories to attach to the drill press.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Hot
214jkf8vll. ac us800
41xjdqbftml. ac us800
Add to compare

uxcell Tap & Bit Sets, M5 x 0.8 H2 Straight Flute Machine Thread Milling Tap, 4.2mm M35 Cobalt High Speed Steel (HSS-CO) Twist Drill Bit

, , , ,
Price range: $16.19 through $76.88

About this item

  • Tap & Bit Sets: Tap size: thread size: M5 x 0.8; accuracy: H2; total length: 62mm / 2.44". Drill bit size: cutting edge diameter: 4.2mm / 0.165"; total length: 75mm / 2.95".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance.
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view